Instruction for use Callisto Mini
9
© ETNA Coffee Technologies b.v.
C O F F E E T E C H N O L O G I E S
5
PREPARING THE MACHINE FOR USE
Certain operations have to be carried out before the Callisto Mini is
ready for use. Although these installation operations should be carried
out by qualified personnel, they are listed step by step below.
The machine must first be set up in a suitable location
(see paragraph
5.1)
and the packaging removed
(see paragraph 5.2)
. Next, the water
container must be filled and the machine connected to the mains
supply
(see paragraph 5.3)
. Now, the ingredient bag must be placed in
the machine
(see paragraph 5.4)
. After filling the supply hose for
ingredient
(see paragraph 5.4.1)
and filling the boiler
(see paragraph
5.5)
, the machine is ready for use.
5.1
Installing machine
The location of the machine must meet a number of conditions.
•
The surface on which the machine stands must be flat and stable.
Also make sure that there is adequate clearance at the side to allow
the door to open. And free space at the rear for the mains cable
connection.
•
Site the machine in an area that does not freeze and is not too
humid.
•
Finally, it is advisable for hygiene reasons not to site the machine in
the vicinity of toilets.
☞
If the machine is standing or has been standing in an area
where the ambient temperature is lower than 0 °C, there is
a risk of the water in the machine freezing.
The machine should be placed in an area where the
ambient temperature satisfies the requirements described
in chapter
10
for at least 8 hours before being switched
on.
5.2
Installing machine
The location of the machine must meet a number of conditions.
•
The surface on which the machine stands must be flat and stable.
Also make sure that there is adequate clearance at the side to allow
the door to open. And free space at the rear for the mains cable
connection.
•
Site the machine in an area that does not freeze and is not too
humid.
•
Finally, it is advisable for hygiene reasons not to site the machine in
the vicinity of toilets.
☞
If the machine is standing or has been standing in an area
where the ambient temperature is lower than 0 °C, there is
a risk of the water in the machine freezing.
The machine should be placed in an area where the
ambient temperature satisfies the requirements described
in chapter
10
for at least 8 hours before being switched
on.