20
© ETNA Coffee Technologies b.v.
Instruction for use Callisto Mini
C O F F E E T E C H N O L O G I E S
9
ERROR MESSAGES AND CORRECTING MINOR
FAULTS
Although every care is taken during production, faults may occur in the
Callisto Mini. Error messages will then be shown on the display. The
following table shows a number of possible faults and remedies.
Error message display
Cause
Remedy
Empty drip tray
The drip tray is full
Empty the drip tray
Boiler is heating up
The boiler is not hot enough
Wait until the boiler has heated
up, message has disappeared
No water
The water container is empty
Fill water container
Containers are empty
The container counter (if
enabled) indicates that the
ingredient bag is empty
Replace ingredient bag
Please de-scale
The de-scaling value (if
enabled) has been reached
De-scaling the machine
Problem
Possible cause
Possible solution
No text in display
Plug not (properly) in the wall
socket
Place the plug (properly) in the
wall socket
There is no drive to the display
from the display printed circuit
board
Call service organisation
The drink does not taste right
The ingredient bag is empty
Replace ingredient bag
The ratio of water/ingredient is
not optimal
Call service organisation to
change the setting
The water can affect the taste
Replace the water
The drink is too cold
The boiler does not heat up
properly
Call service organisation to have
the boiler checked/replaced
