Instruction for use Callisto Mini
17
© ETNA Coffee Technologies b.v.
C O F F E E T E C H N O L O G I E S
12.Slide the hose lock off the ingredient bag hose so that the hose is
no longer closed
(see paragraph 5.4.1)
.
13.Switch on the machine (on/off switch).
14.Place a jug under the dispensing nozzle.
15.Press button
2
on the service panel inside the door. Keep this
button pressed until the hose of the peristaltic pump is completely
filled.
16.Press button
1
on the service panel inside the door. The mixer will
be rinsed with hot water.
17.Repeat step 16 until the mixer is clean.
18.Close the cover and the door of the machine.
7.3
De-scaling
This machine has a “calcium” counter. This can be used to display an
automatic de-scale message.
☞
The message appears after a set water hardness
(see
paragraph 7.3.1)
.
The de-scaling function can also be started at an arbitrary
time. Follow the procedure from point 2.
1. Message: Ontkalken AUB (Please de-scale).
2. Press button 4 on the service panel.
3. Press the middle (start) button on the selection panel.
4. Follow the instructions, fill the water container with a de-scaling
agent.
5. Place a drip tray under the outlet.
6. Press start, the machine starts the de-scaling procedure.
7. Wait for the message “water vullen” (fill with water).
8. Fill the water container with fresh water.
9. Press start, the machine starts the rinsing procedure.
10.After this procedure, the machine is ready for use again.
