ETNA AIP790 Series, Instructions For Use Manual

Page: 49 / 60

EN 13
APPENDIX
Environmental aspects
This appliance was manufactured using sustainable materials. It
must be disposed of responsibly at the end of its life cycle. The local
authorities can provide you with the relevant information.
The packaging of this appliance is recyclable. It may have been made
from:
• cardboard;
• polythene film (PE);
• CFRP-free polystyrene (PS hard foam).
You need to dispose of these materials responsibly in accordance with
official regulations.
To draw attention to the fact that the segregated processing of
household electrical appliances is compulsory, this appliance carries
the symbol of a crossed-out dustbin. This means that you may not
dispose of the appliance as household refuse at the end of its useful
life. Instead, it should be taken to a special segregated refuse collection
centre run by the local authority or to a dealer providing this service.
Segregated processing of household appliances prevents any negative
impact on the environment and public health that might otherwise
arise. It allows the recovery of the materials used to manufacture
this appliance, thus generating considerable savings in terms of raw
materials and energy.
Declaration of conformity
We hereby declare that our products satisfy the applicable European
directives, orders and regulations, as well as the requirements stated in
the referenced standards.