ETNA AIP790 Series, Instructions For Use Manual

Page: 46 / 60

EN 10
Carbon filter
• Remove the grease filter.
• Mount the carbon filter.
The carbon filter is clamped on top of the grease filter. Prevent the
carbon filter from falling on your hob by supporting it when installing
and removing the filters.
• Fit the grease filter with the carbon filter.
Important:
• The saturation of the filter depends on the intensity of use, the
manner of cooking and the regularity with which the grease filters
are cleaned.
• The carbon filter must be cleaned at least once every four months.
• As an odor filter, this appliance uses long-life filters, recognizable
by the green plastic. This filter must be cleaned every four months.
Cleaning procedure long-life filter
• The carbon filter can be washed by hand in mild soapy water, or in
the dishwasher at a maximum temperature of 65 °C. This washing
cycle must be done without other dishes and without dishwasher
detergent.
Do not use any cleaning agents!
• Remove excess water. Be careful to avoid damaging the filter.
Place the filter in the oven to dry for at least 1 hour at a maximum
temperature of 80 °C. After 4 times of cleaning (or if the filtre is
damaged), the filter will need to be replaced.
Lighting
This hood is fitted with a light system. This light system has to be
replaced by an authorized technician. Do not attempt to replace it
by yourself.
The lamp in this household appliance is only suitable for
illumination of this appliance. The lamp is not suitable for
household room illumination.
MAINTENANCE