ETNA AIP790 Series, Instructions For Use Manual

Page: 45 / 60

EN 9
Grease filter
• Before you can remove the grease filter, you must open the edge-
extractor panel.
• Hook your fingers behind the panel and use your thumbs to lever it
away from the edge of the extractor hood.
• Flip the edge-extractor panel downwards.
• Press the lock of the grease filter and tilt the grease filter
downwards. Now you can remove the grease filter from the hood.
If present, the carbon filter is clamped on top of the grease filter.
Prevent the carbon filter from falling on your hob by supporting it when
installing and removing the filters.
• Clean the grease filters.
• Put the filters back into place.
• Press the edge-extractor panel into place; it works with magnets.
MAINTENANCE