background image

 
 
 

Appendix F.  Users Manual 

ETL Inc.

 

 

#584 Sangwhal- ri, Kanam -myon,  
Yoju-kun, Kyounggi-do,   

469-885, Korea 

                                                                                 

10 of 13 

FCC ID : 

QTIMRD-1000

 

Report No:E03.0103.FCC.009N   
Issue of Date : January 3, 2003

 

MICROLINE Co., Ltd. 

Radar Detector 

Model : MRD-1000 

2)Remove the fuse and check the fuse  to see if it has blown. If it has blown, 

Replace it. 

 

 

 

(3) Power and Self-test 

To turn the detector on, connect power and turn the On/Off volume control away from 

you until it clicks.  

 

Volume Off

 

 

When powered up, the detector sounds a  distinctive tone for each signal and 

flashes all LEDs in sequence as a self-test. Then all LEDs turn off except the power 

LED. 

 

(4)  Adjusting Volume 

To change the detector’s volume, turn volume control either away or toward you. 

5. Troubleshooting 

??

Solutions for Common Problems 

If the detector does not turn on:

 

 The cigarette lighter socket might be dirty. Clean it with fine emery cloth to ensure a 

good. Clean connection. 

 Check the power cord. Be sure all power connectors are properly installed. 

 Check the fuse that controls power to the cigarette lighter socket. 

   See your vehicles owner’s manual. 

 Vehicle electrical problem exists. 

 Make sure that the volume control is in the ON position. 

 

Summary of Contents for MRD-1000














Reviews: