background image

Etisalat HSPA WiFi Router  USER GUIDE

4.4  MAC Filter

This screen appears when Media Access Control (MAC) Filter is selected. This option allows access to be restricted 
based upon the unique 48-bit MAC address.

To add a MAC Address filter, click the Add button shown below.

To delete a filter, select it from the table below and click the Remove button. 

Option

Description

mAC Restrict mode

Disabled – Disables MAC filtering

Allow – Permits access for the specified MAC addresses. 

NOTE: 

Add a wireless device’s MAC address before clicking the Allow radio button or else 
you will need to connect to the Router’s web user interface using the supplied yellow 
Ethernet cable and add the wireless device’s MAC address.

Deny – Rejects access for the specified MAC addresses

mAC Address

Lists the MAC addresses subject to the MAC Restrict Mode. The Add button prompts 
an entry field that requires you type in a MAC address in a two-character, 6-byte 
convention: xx:xx:xx:xx:xx:xx where xx are hexadecimal numbers. A maximum of 60 
MAC addresses can be added.

Enter the MAC address on the screen below and click Save/Apply.

4.5  Wireless Bridge

The following screen appears when selecting Wireless Bridge, and goes into a detailed explanation of how to 
configure wireless bridge features of the wireless LAN interface.

Click Save/Apply to implement new configuration settings.

Feature

Options

AP mode

Selecting Wireless Bridge (Wireless Distribution System) disables Access Point (AP) 
functionality while selecting Access Point enables AP functionality. In Access Point 
mode, wireless bridge functionality will still be available and wireless stations will be 
able to associate to the AP. 

Bridge Restrict

Selecting Disabled in Bridge Restrict disables Wireless Bridge restriction, which means 
that any wireless bridge will be granted access. Selecting Enabled or Enabled (Scan) 
allows wireless bridge restriction. Only those bridges selected in Remote Bridges will be 
granted access. Click Refresh to update the station list when Bridge Restrict is enabled.

Wireless

Summary of Contents for HSPA



























































Reviews: