eTIGER secual box, User Manual

Page: 40 / 45

Presentation Setup Daily use Settings Accessories Precautions
Accessories
40
Connect additional accessories
Connect additional detectors / controls
1. Press once the Connection button
3
of the control panel.
2. Trigger the accessory or send a signal with it (for example, press "Disarm" ( ) on
a remote control, or separate the magnet from the transmitter of a door contact).
3. The control panel beeps once, the accessory is now connected. If your control
panel beeps twice, the accessory was already connected.
A piece of advice
If your Secual Box is connected to your home Wi-Fi network, you can also
connect additional accessories from the app:
- Open the app and log in to your account.
- Connect to your alarm.
- From your alarm's dashboard, slide from the right to show the options and
click on "Detectors" or "Controls".
- Click on "Add detector" or "Add control" and follow the instructions on
screen.
Connect additional sirens
Not all sirens have the same way of connecting. Please refer to the user manual
of your siren to connect it to your control panel.
A piece of advice
- Before connecting your siren to your control panel, make sure there is no
entry / exit delay on your Secual Box. If so, delete the delay for the time of
the connection.
- During the connection of your siren, make sure you do not trigger any
detector and you do not stay in the scope of a motion sensor.