9
www.ETiSSL.com
Please contact 1-855-384-7754 for further assistance.
2
Completing the installation
□
Snap the fixture body (B) into the U brackets (CC) installed on the mounting surface.
□
Restore the power supply to turn on the light.
surface Mounting (continued)
Linking Fixtures
WarninG:
RISK OF ELECTRIC SHOCK. Disconnect power to the vapor tight light before linking additional fixtures.
WarninG:
Provide power to the fixtures only after all linking connections have been made.
□
Multiple vapor tight lights can be connected, up to a maximum of 7 fixtures. Only the first light fixture needs to be direct wired to an
electrical box.
□
Use a flathead screwdriver to remove a knock out hole on the end of the fixture body (B).
□
Connect additional black, white, green, purple, and gray wires to those from the power source and the electrical box on the first
fixture.
□
Feed the wires into a connector plug or through the knock out hole on the end of the fixture body (B), depending on the wiring
method preferred by the installer.
noTe:
If feeding the wires through the knock out hole, an additional cord grip (not included) will be required.
CC
B
B
A
Knock out holes
CC
B
Cord grips
A