ETI VT-4-70-840-MV-D, Use And Care Manual, Page: 4 / 36

4
installation
Select a suitable location that can support the weight of the fixture. Determine the method for mounting the fixture before drilling, based on
the type of ceiling.
WarninG: RISK OF ELECTRIC SHOCK. Ensure the electricity to the wires you are working on is shut off. Either remove the
fuse or turn off the circuit breaker before removing an existing light fixture or installing the new one.
1
Removing the lens cover
□
Remove the lens cover (A) by opening the 10 stainless steel clips on both sides of the fixture body (B).
HARDWARE INCLUDED
noTe: Hardware not shown to actual size. Hardware for motion sensor installation is not included, please contact ETi for separate purchase.
Part Description Quantity
AA Mounting Screw 4
BB Drywall Anchor 4
CC U Bracket 2
DD V Clip* 2
EE Cord Grip 1
FF Wire Connector 5
GG Chain* 2
HH S Hook* 4
* For suspension mounting only
AA BB CC
DD EE
GG
FF
HH
pre-installation (continued)
A
B
Stainless Steel Clips