INSTRUMENT OPERATION
- Remove
the battery cover with a screwdriver and
insert two x AAA batteries making sure the
polarities are correct. Retighten the battery
cover ensuring the gasket stays in place so
that the timer remains water resistant.
An alarm tone will sound and the timer
will display ‘00:oo’. The timer is then ready
to use.
TO SET REQUESTED TIME
- To set the
timer, press the ‘SET’ button positioned
on the back of the unit. Pre-set times are
20, 30, 40 seconds and 1, 2, 3, 4 and 10
minutes. The pre-set time programmed
will be shown in the display. Please note
that whilst the pre-set time is being
programmed, the motion sensor will not
work. After the chosen time is set the
motion sensor will start to capture motion
again after five seconds.
TO USE THE TIMER
- Wave your hand in
front of the motion sensor to activate
the pre-set time selected, the wash hand
symbol will then appear in the screen
when the countdown is happening. Once
the time has elapsed the alarm will sound
and the digits will flash. After 10 seconds
the display will reset to the pre-set time
selected. If the sensor isn’t active for two
minutes, it will automatically power off.
The timer will remember the last selected
time which can be recalled by a wave of
your hand in front of the motion sensor
When you wave your hand again in front of
the motion sensor the timer will start to
count down.
The timer is supplied with a Velcro pad
for easy positioning.
BATTERY REPLACEMENT
- Replace the
battery when the low battery symbol
illuminates or if the display dims. Remove
the battery cover with a screwdriver and
insert two x AAA batteries making sure the
polarities are correct. Retighten the battery
cover ensuring the gasket stays in place so
that the timer remains water resistant.
GUARANTEE
- This instrument carries
a one-year guarantee against defects
in either components or workmanship.
During this period, products that prove to
be defective will, at the discretion of ETI,
be either repaired or replaced without
charge. The product guarantee does not
cover damage caused by fair wear and tear,
abnormal storage conditions, incorrect
use, accidental misuse, abuse, neglect,
misapplication or modification. Full
details of liability are available within ETI’s
Terms & Conditions of Sale at etiltd.com/
terms. In line with our policy of continuous
development, we reserve the right to
amend our product specification without
prior notice.
