3 www.ETiSSL.com
Please contact 1-855-384-7754 for further assistance.
Pre-Installation
PLANNING INSTALLATION
Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts
with the package contents list. If any part is missing or damaged, do not attempt to assemble, install or operate the
product. Contact customer service for replacement parts.
NOTE:
Keep your receipt and these instructions for proof of purchase.
If you are unfamiliar with electrical installations, we recommend you contact a qualified electrician to do the
installation.
IMPORTANT NOTICE: This wrap light is wired to replace an existing fixture with an installed battery back-up. It
requires that the electrical box where the fixture is installed include wires for both constant power and switched
power circuits, as well as a neutral wire and a ground wire. If the electrical box does not include wiring for a
constant circuit to continuously power the battery back-up, an additional wire will need to be pulled that provides
continuous power supply.
NOTE:
Two people are recommended for the installation of this light fixture.
TOOLS REQUIRED
Wire
Strippers
Safety
Goggles
Ladder
Gloves
Flathead
Screwdriver
Phillips
Screwdriver
Wire
Cutters
Power Drill
with drill bits
PACKAGE CONTENTS
Part
Description
Quantity
A
Wrap Light Housing
1
B
Wrap Light Diffuser
1
A
B
HARDWARE INCLUDED
NOTE:
Hardware not shown to actual size.
Part
Description
Quantity
AA
Mounting Bracket
1
BB
Gasket
1
CC
Wire Connector
6
DD
Electrical Box Screw
2
EE
Drywall Anchor
2
FF
Mounting Screw
2
AA
BB
DD
EE
CC
FF