background image

 

3 ETiSSL.com

 

 

Please contact 1-855-384-7754 for further assistance.

Safety information

WarninG:

 Carefully read and understand the information 

given in this manual before beginning the assembly and 
installation. Failure to do so could lead to electric shock, fire, 
or other injuries which could be hazardous or even fatal.

WarninG:

 Ensure the electricity to the wires you are 

working on is shut off. Either remove the fuse or turn off the 
circuit breaker.

WarninG:

 Changes or modifications not expressly 

approved by the party responsible for compliance could void 
the use authority to operate the equipment.

nOTiCe:

 This equipment has been tested and found to comply with 

the limits for a Class B digital device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide reasonable protection against 
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy 
and, if not installed and used in accordance with the instructions, may 
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a 
particular installation. If this equipment does cause harmful interference 
to radio or television reception, which can be determined by turning 
the equipment off and on, the user is encouraged to try to correct the 
interference by one or more of the following measures:

 

Reorient or relocate the receiving antenna.

 

Increase the separation between the equipment and the receiver.

 

Connect the equipment into an outlet on a circuit different from that to 
which the receiver is connected.

 

Consult the dealer or an experienced radio/TV technician for help.

Warranty

WHAT IS COVERED

The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period 
of five (5) years from date of purchase. This warranty applies only to the original consumer purchaser and only to 
products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation, 
and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided 
that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect, or 
mishandling.

WHAT IS NOT COVERED

This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any 
way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of 
the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure 
not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the 
product, such as surface and/or weathering, as this is considered normal wear and tear.

The manufacturer does not warrant and specifically disclaims any warranty, whether express or implied, of fitness 
for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any 
liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any 
labor / expense costs involved in the replacement or repair of said product.

Contact the Customer Service Team at 1-855-384-7754 or visit www.ETiSSL.com.

Table of Contents

Table of Contents ......................................3
Safety Information ....................................3
Warranty ...................................................3
Pre-Installation .........................................4

Planning Installation ..............................4
Tools Required .......................................4
Package Contents ..................................4 

Hardware Included .................................4

Installation ................................................5
Maintenance .............................................7
Light Distribution ......................................7
PIR Sensor Testing ....................................8
Care & Cleaning ......................................11
Troubleshooting ......................................11

Summary of Contents for 51402241













Reviews: