2
3
ETiSSL.com
Please contact 1-855-384-7754 for further assistance.
Table of Contents
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Pre-Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Planning Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Hardware Included . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Adjusting the Color Temperature of the Light . . . . . . . . . . . . . 6
Care and Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
safety information
WarninG:
Carefully read and understand
the information given in this manual before
beginning the assembly and installation. Failure
to do so could lead to electric shock, fire, or
other injuries which could be hazardous or even
fatal.
WarninG:
Ensure the electricity to the wires
you are working on is shut off. Either remove
the fuse or turn off the circuit breaker
.
nOTiCe:
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15B of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
□
Reorient or relocate the receiving antenna.
□
Increase the separation between the equipment and the receiver.
□
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
□
Consult the dealer or an experienced radio/TV technician for help.
WarninG:
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Warranty
This product is warranted for a period of 5 years from the date of original purchase against defects in materials and
workmanship. If this product should fail to operate due to defects in material or workmanship within 60 months of purchase,
see www.ETiSSL.com for details. This product will be repaired or replaced, at ETi’s option. This warranty is expressly
limited to repair or replacement of product and liability for direct, incidental, or consequential damages is hereby expressly
excluded. Some states do not allow exclusions of direct, incidental or consequential damages, so the above limitation of
exclusion may not apply to you. This warranty gives the consumer specific legal rights, which vary from state to state.
WARRANTY IS VOID IF PRODUCT IS NOT USED FOR THE PURPOSE WHICH THIS PRODUCT IS MANUFACTURED.
Pre-installation
PLANNING INSTALLATION
Before beginning assembly, installation or operation of product, make sure all parts are present. Compare parts with the package
contents list. If any part is missing or damaged, do not attempt to assemble, install or operate the product. Contact customer service
for replacement parts.
nOTe:
Keep your receipt and these instructions for proof of purchase.
If you are unfamiliar with electrical installations, we recommend you contact a qualified electrician to do the installation.
TOOLS REqUIREd
Wire
Strippers
Safety
Goggles
Ladder
Gloves
Flathead
Screwdriver
Phillips
Screwdriver
Electrical
Tape
Wire
Cutters
PACKAGE CONTENTS
Part
description
quantity
A
Fixture Plate
1
B
Diffuser Shade
1
Part
description
quantity
AA
Wire Connector
3
BB
Mounting Screw
2
HARdWARE INCLUdEd
nOTe:
Hardware not shown to actual size.
AA
BB
This fixture does not use a mounting bracket to secure it to the electrical box. Instead, it is secured to the box by the included screws
specifically designed to ground the pan to a metal electrical box. For safe operation, use only the electrical box screws included in the
hardware kit. Screw them into the electrical box until there is about 3/8 in. between the ceiling and the underside of the screw head.
A
B
