19
1.
Disconnect the test leads and turn the
rotary dial to
OFF
.
2. Remove the protective jacket from the
multimeter.
3. Use a small screwdriver to remove the
screw on the battery compartment cover
on the back of the multimeter.
4. Remove the old batteries. Install 2 new 1.5V
AA batteries into the compartment under
the correct polarity. [
Figure 11.1
]
5. Replace and secure the battery
compartment cover.
Replacing the Batteries
1.5V AA battery
Figure 11.1
Note:
• To avoid inaccurate measurements, replace
the batteries immediately when the low battery
indicator (
) appears on the display screen.
• The multimeter requires two 1.5V AA batteries.
• Clean the multimeter with a damp cloth and
mild detergent.
Do not
use abrasives or
solvents.
• If you are experiencing any issues with
the multimeter, please contact
Customer
Support
(see page 30).
• Any calibration or maintenance must be
done by qualified professionals.
General Maintenance
Maintenance
Summary of Contents for MSR-A1000
Page 31: ...31 Connect with us Etekcity ...
