3
SPECIAL INSTRUCTIONS FOR USE IN GREAT BRITAIN
IMPORTANT
The wires in the mains lead are coloured according to the following code:
Green – and – Yellow
>
Earth
Blue
>
Neutral
Brown
>
Live
The wires in the mains lead of this instrument may not correspond with the
coloured markings, you should therefore refer to this diagram to identify
the terminals in your plug:
RADIO/TV INTERFERENCE AVOIDANCE
This unit operates at radio frequencies. Unless it is correctly installed and used properly - that is in strict accordance
with the manufacturer's instructions - it may interfere with radio and television reception.
It has been carefully designed according to the rules and regulations in force at the time, and has been equipped with
various types of screening designed to provide reasonable protection against such interference in a residential
installation.
However, there is no guarantee that interference will not occur in any particular installation.
If this equipment does appear to cause interference with radio and TV, which can be determined by switching it off to
see if the interference disappears and then switching it on again to see if it reappears, the user is encouraged to try to
correct the interference by carrying out one or more of the following measures:
1. Turn the radio or TV aerial (antenna) to face in a different direction.
2. Change the instrument's position with respect to the receiver.
3. Move the instrument away from the receiver.
4. Plug the instrument into another power socket, which is part of a different branch circuit.
5.
If necessary, the user should contact the dealer or an experienced Radio/TV technician for additional advise.
FOR USERS IN THE UNITED STATES OF AMERICA
:
The user may find the following booklet prepared by the Federal Communications Commission helpful: "How
to identify and resolve Radio/TV interference problems". This book is available from the U.S. Goverment
Printing Office, Washington D.C. 20402, Stock No. 004-000-00345-4.
Connect the GREEN and YELLOW earth wire to the
terminal with the letter E or coloured Green or Green
and Yellow or marked with the ground symbol.
Fuse should be changed to a
3 AMP rating type
if not already fitted.
Connect the BLUE neutral wire
to terminal marked with
the letter N or coloured Black.
Connect the BROWN live
wire to terminal marked with
the letter L or coloured Red.
