4 Ports 11g Wireless ADSL2/2+ Router
18
3.4 Checking TCP/IP Configuration
After your PC is configured and the system has rebooted, you can check the TCP/IP configuration using
the following utility provided by your Windows system:
A.
Windows 98/ME:
1. Click
on
“Start”
and
“Run”
.
2.
In the open field, enter
“Command”,
then press
“OK”
.
3.
In the command prompt, type
“Winipcfg”
, and then press
“Enter”
. All the Ethernet adapter
information will be shown in the appears Windows. Check if you can get the following setting:
The
IP Address
as
192.168.1.x
The
Subnet Mask
as
255.255.255.0
The
Default Gateway
as
192.168.1.1
4. Type
“Exit”
to end up the MS-DOS Prompt.
Summary of Contents for PT-8505G
