4 Ports 11g Wireless ADSL2/2+ Router
169
6. Select
the
Quality of Service
(QoS); leave the default value if you are unsure or the ISP did not provide
this information.
7. Under
Static Setup
, select the encapsulation type (LLC or VC).
Note:
If you are not sure just use the default mode.
8.
Based upon the information your ADSL/ISP provided, enter your assigned
IP address
,
Subnet Mask
,
Default Gateway
(if provided), and
Domain Name Services
(DNS) values (if provided).
9.
For the static configuration, you can also select a
Bridged
connection or a
Routed
connection. Since
static IP address is typically used to host WEB servers, you may want to use a bridge connection.
10. Click
the
Apply
button to complete the connection setup. This will temporarily save this connection as
illustrated in below. A new link has been created for this connection in the left-hand column. You can
apply/delete/cancel this connection using this screen.
11. To complete and save the connection profile, click
Save All
after clicking the
Apply
button.
Summary of Contents for PT-8505G
