manualshive.com logo in svg

Etec PT-8505G, User Manual, Page: 154 / 253

Share
Download
Etec PT-8505G User Manual Download Page 154

 

4 Ports 11g Wireless ADSL2/2+ Router

 

147

 

4.5.5.2.1.1 Advanced – WAN – Host Trigger   

 

This field is used in conjunction with the 

On-Demand 

feature and is enabled only when the 

On Demand 

field is checked. There are three types of packets: 

 

 

 

LAN packets (type 1): packets routed through the 4 Ports 11g Wireless ADSL2/2+ Router from 

LAN to WAN. 

 

Proxy packets (type 2): packets generated by the 4 Ports 11g Wireless ADSL2/2+ Router after 

receiving packets from the LAN side, such as DNS proxy. 

 

Locally generated packets (type 3): Packets generated by the 4 Ports 11g Wireless ADSL2/2+ 

Router, such as Voice, SNMP, etc.   

When the 

On-Demand 

feature is enabled and 

Host Trigger

 is unchecked, only flow of type 1 packets 

keeps the link active, i.e., if the 4 Ports 11g Wireless ADSL2/2+ Router has not received type 1 packets for x 

mount of time (as specified in the 

Time Out 

field), the connection times out. 

If 

Host Trigger

 is checked, type 2 and type 3 packets can keep the link active as well. You can 

configure the packets using the 

Trigger Traffic 

page, which is accessed by clicking the 

Configure 

button 

next to 

Host Trigger

. The following fields can be used to identify the traffic of type 2 and/or type 3 that will 

keep the link alive:   

 

Source Port (the character * is used to denote 

any 

port) 

 

Destination Port (the character * is used to denote 

any 

port) 

 

Protocol (TCP, UDP, ICMP, or Specify the protocol number) 

 

Summary of Contents for PT-8505G






























































































































































































































































Reviews:

No comments