4
CONNECT DVD PLAYER TO OTHER APPLIANCES
It is recommended you connect the player to a multi-system TV.
Ensure that this player and other appliances (TV set and amplifier) that will be connected to the player are set to OFF mode
and that the AC cords are disconnected from the wall outlet.
Avoid blocking ventilation holes of the connected appliances and make sure air around there can circulate freely.
Read carefully and follow the instructions before connecting other appliances.
Ensure that you observe the color coding when connecting audio, video cables. If the RCA adapter is supplied only, the
audio/video RCA cable is required. Plug one end of the RCA adapter to the unit. Then connect the audio/video RCA cable to
the RCA adapter and the television.
AUDIO R AUDIO L VIDEO IN
S-VIDEO
YUV INPUT
AV AUDIO/VIDEO INPUT
After connection is firmed and securely done, plug AC ADAPTER to an applicable wall outlet and turn on the player.
CHARGE THE BUILT-IN BATTERY
The player is with a rechargeable lithium battery. Before using the battery, please make sure it is charged. If not, charge it first.
Slide the power switch to OFF position and then connect one end of the supplied adapter to the wall outlet and the other end to
the unit for charging the built-in battery.
Note:
1. The battery only could be charged at powering off mode.
2. If the unit is not in use for a prolonged period of time, it is recommendable to charge the built-in battery each three months.
CONNECTING TO A CAR ADAPTOR
The car power adaptor is designed for use with vehicles that have a 12V, negative ground electrical system.
WARNING:
Disconnect the car power adaptor when not in use. Not in use in 24V vehicles.
CAUTIONS:
Use the unit only with the recommended car power adaptor, use with other car power adaptor might damage the unit.
The recommended car power adaptor is for use with this unit only. Do not use it with other equipment.
In the interests of road traffic safety, do not operate the unit or view video software while driving a vehicle.
Make sure the unit is fastened securely to prevent from moving outside of the vehicle in an accident
When the inside of the cigarette lighter socket is dirty with ashes or dust, the plug section may become hot due to poor
contact. Be sure to clean the cigarette lighter socket before use.
After use, disconnect the car power adaptor from both the unit and cigarette lighter socket.
FUSE REPLACEMENT
FUSE
POSITIVE (+) CAP
NOTE: Don't throw out the positive (+) cap when replace the fuse.
OPERATIONS
PREPARATION
Power on the TV set and select video input mode.
Power on the audio system which is connected to the player.
GET STARTED
1. Slide POWER switch to turn on the player.
2. Press DISC cover open key to open the disc tray.
3. Place a disc onto the disc tray.
TV SET
A/V cable
To the cigarette lighter socket
