PCB
PCB function
With the PCB function on, choosing a song on
a CD can only be done when at the main menu.
With the PBC function off, song selections
can be made by entering the number of the
song selection with the number buttons.
Repeat Play
This DVD receiver allows repeated playback
of specific titles, chapter/tracks or segments.
It even allows switching between two items
that are being repeated.
1. Select the item to repeat.
2. Press the REPEAT button.
The repeat mode changes each time the
REPEAT button is pressed (i.e., from
title repeat to chapter repeat, all repeat,
to repeat off.)
ZOOM
For DVDs with zoom capability only.
A picture may be enlarged up to four times
during either playback or slow motion
through the unit's zoom function. Press the
ZOOM button once and it enlarges the image
1x, press a second time and the image enlarges
2x. A third press enlarges the image 4x. To
return to a normal-size image, press the
ZOOM button a fourth time. Enlargement
takes place in the center of the Picture
Volume and Mute
The volume on this DVD player is easily
controlled with the remote control by
pressing the VOL+ button to raise the volume
or the VOL- button to lower it. By pressing
the MUTE button, no audio will be heard. To
return the audio, press the MUTE button
again.
Shuffle Function
Press SHUFFLE button to play the disc at
Random
Program
This function allows you to program the
desired order of play for specific tracks.
Press the PROG button, and the Program
menu will appear on the screen. Set the
programs play order using the number
buttons. Then scroll to Start on the menu.
Press the ENTER button to begin program
play. To exit from the program play mode,
press the PROGbutton again
DVD Menu Setup
Press the SETUP button on the remote
control and the main menu will appear.
1. After accessing the setup menu, press the
scroll button up or down to select a desired
Item.
Once an item is selected, press the PLAY/
PAUSE button to confirm your entry and
then you will have access to the Sub-
directory.
2. Use the left or right scroll buttons to move
the pointer and the up or down scroll buttons
to select the desired option. Once an item is
selected, press the ENTER button to confirm
your selection. This completes the setup of the
selected function.
A-B Repeat
Press "A-B" once to set a start-point, press
again to set an end and complete the setting.
The selected section A-B will be repeated.
The third press will cancel this function.
A-B
AB
FUNCTIONS
