-2-
1.
Preliminary Instructions
● This instrument has been designer for use in environments with
pollution degree 2
● You are recommended to respect the usual safety regulations
aimed at protecting you against dangerous current and protecting
the instrument against improper use
● Only the original accessories supplied along with the instrument
guarantee compliance with the safety standards in force. They
must be in a good conditions and, if necessary, replaced with
identical ones
● Do not test nor connect to any circuit exceeding the specified
overload protection
● Do not take measurements under environmental conditions
exceeding the limits indicated in this manual
● Make sure that batteries are correctly installed
2. During Use
You are recommended to read carefully the following instructions:
CAUTION
Failure to comply with warnings and instructions may
damage the instrument and/or its components as well as
injure the operator
● Do not measure in the presence of external voltages. Although
the instrument is protected, an excessive voltage may cause
malfunction
● In any cases, safety shall come first when using this Tester,
