2
u
To avoid the impact of transducer clamp, it needs to maintain
this meter regularly. Do not use corrosive or coarse materials to
clean, but use soft cloth (such as glasses cloth), dipping clean
anti-rust desiccant lubricant (such as WD-40), and making a
gentle wiping.
u
For the reason of this meter, in case that any danger may
occur if continue to use it, stop using it immediately and seal it
up for keeping at once, which shall be dealt with by qualified
authorization agency.
u
The danger symbol
“
“
on the meter and the manual, the
user must make safe operation according to the indication.
u
The extremely dangerous symbol
“
”
, the user must make
safe operation according to the indication.
u
It suggests that this meter shall be made insulation intensity
test at least once annually. (AC 100kV/rms
5 sections insulating
rod all connections, between both ends
)
u
As to the part with
“
*
”
mark in this manual, it is only limited to
ETCR9200B
(wireless Transmission data ).