6
Peak
Maintenance
Automatically maintain the height of the tes
t value
，
usually in the test mode press
PE
AK
key
，
LCD top right corner will display
“
PE
”
，
that is, to keep open the PEAK function, th
en press
PEAK
key to cancel this function
Circuit Voltage
Test insulating sheath wires
（
≤
60kV
）
or bare
wire t
（
≤
35kV
）
(operated with insulation rod)
Data
Preservation
Under general test mode, press
HOLD
button
to preserve data,
“
DH
”
symbol display. then
press
HOLD
Key to cancel (
“
HOLD
”
symbol
display)
Data Access
“
MR
”
symbol indicates, it can read the stored
data by turning upwards and downwards.
Overflow Display
Exceed measurement range overflow function:
“
OL A
”
symbol display
* No signal
Indication
When the receiver has not received transmit
signal, it will display
“
no- -
”
symbol
Auto Shut Down
About 15 minutes after booting, the meter will
shut down automatically, in order to decrease
the battery consumption.
Battery Voltage
When the battery voltage is below 4.8V, the
symbol of battery voltage
“
”
will show to
remind to replace battery.
Weight
Tester
：
About 620g (Including battery)
receiver
：
About 220g (Including battery)
Total quality of meter: about 2.3kg(including
insulation rod and battery)
Work
Temperature and
Humidity
-10
℃
~40
℃
；
≤
80%Rh