11
Under
PEAK
testing mode
，
press
POWE
button to power off.
Under data reference mode, firstly press
POWER
button for more
than 3 seconds to exit from data reference mode, returning to
normal test mode, then press
POWER
button to power off. During
the exit from data access, it will display
“
End
”
symbol.
2. General Test
High voltage, extremely dangerous! It must be operated
by qualified staff that has acquired authority. The operator
must strictly abide by the safety rules. Otherwise, there is
electric injury danger, causing personal damage or
casualty accident.
u
Dangerous!
It is forbidden to use the meter test
voltage more than 35 kV convergence of bare wire or
bus.
Otherwise, there is electric injury danger, causing
personal damage or equipment damage.
Dangerous! It cannot be used to measure the circuit over
600A voltage. Otherwise, there is electric injury danger,
causing personal damage or equipment damage.
General Test: In the process of test, LCD will display the tested
current value real time, and LCD data will vary with the current
change. When the tester is removed away from the lead on test, it
does not preserve the test result, LCD display will return to zero.
In normal testing mode, it is suitable for close distance
measurement, convenient for circuit test by direct read of LCD
data.