-
2
-
Thanks for your purchase of
ERCR9000
H/L Voltage Clamp
Meter of our company. In order to make better use of this product,
please make sure to:
----Read this manual in detail and the operator must totally
understand this manual and be in proficient in operation of this
meter before making test on spot.
----Comply strictly to the security rules and notice items listed
on this manual.
u
In any case, it should pay special attention to safety in use of
this meter, particularly in measurement of circuitry with more
than
AC100V and above voltages.
u
If the voltage of tested circuitry has exceeded 600V, it must be
used by connecting with an insulation rod.
u
As it is very dangerous of high voltage transmission line, the
operator must get strict training and the relevant certification
on high-pressure operation of the state before using this meter
and making a field test.
u
It is strictly forbidden to use this meter to test the wire or
convergence generatrix without any insulation.
u
Please pay attention to marked words and symbols on panel
or backboard of this meter.
u
Please do not put or store this meter in the place of high
temperature, with moisture, with frozen dew or with direct
daylight irradiation for a long time.
u
Please note the battery polarity when replacing battery, and
remove the battery if do not use this meter for a long time.
u
It must be operated by qualified staff that has the authorization
on tearing down or repairing this meter.
u
Please do not use it when there is any damage on the
transducer clamp or other parts of this meter.
u
To avoid the impact of transducer clamp, it needs to maintain
this meter regularly. Do not use corrosive or coarse articles to
clean, but use soft cloth (such as glasses cloth), dipping clean
Summary of Contents for 9000
Page 1: ...Catalogue ...