ETC Source Four Revolution User Manual Download Page 43

Page: 43 / 52

Routine Maintenance

Adjusting the scroller drive belt tension:

Step 1:

See

General belt adjustment instructions:, page 38

Step 2:

Remove the scroller if not already done. See

Removing and replacing the scroller

cartridge:, page 26

Step 3:

Using both hands, gently fold in the IMF doors and move the assembly toward

the rear lens.

Step 4:

Loosen, but do not remove, the three motor mounting plate screws so that the

motor moves freely.

Step 5:

Turn the pulley back and forth two or three times and allow the spring to take up

the slack in the belt.

Step 6:

Tighten the three screws.

Step 7:

Pinch the belt together to ensure it maintains pressure and rotate the motor

pulley to ensure it turns freely.

Motor Pulley

Motor Adjustment

Screws

Belt Tension

Summary of Contents for Source Four Revolution





















































Search results

Summary of Contents for Source Four Revolution

Reviews:

Related manuals for Source Four Revolution

Brands by name

Popular brands

ETC Source Four Revolution, User Manual

Search results

Summary of Contents for Source Four Revolution

Reviews:

Related manuals for Source Four Revolution

Brands by name

Popular brands