4
Source 4WRD II Installation and User Manual
WARNING:
Note the following safety warnings before use:
•
The Source 4WRD II LED is not user serviceable. Field
modification of the Source 4WRD II LED will void your
ETC warranty.
•
Do not use the fixture below 5°C (41°F).
•
Minimum storage temperature is 5°C (41°F). When the
fixture has been stored or transported in cold
temperatures, allow it to warm to room temperature
for a minimum of 1 hour before applying power.
Applying power to a cold fixture will cause damage to
the fixture and void the ETC warranty.
•
Do not use this fixture if a glass lens is deeply scratched
or cracked. Damaged lenses must be replaced.
•
To prevent wiring damage, or abrasion, do not expose
wiring to edges of sheet metal or other sharp objects.
•
Use the fixture in dry locations only, where humidity
does not exceed 90 percent (non-condensing). These
fixtures are not intended for outdoor use.
