System Settings and Setup
34
Scheduled Timed Events
Up to 80 Timed Events can be programmed across all enabled spaces in the system. Select the
Add Event button and configure its options.
•
When - determines when an event should occur. Time of Day is the default option. If
opening and closing hours have been configured, Open and Closed become available. If
"Use Astro" is enabled in
, Open Day, Open Night, Closed Day, Closed
Night, Day, or Night become available.
•
Recurrence - events may be set to occur and re-occur on any combination of individual
days of the week. Select up to seven days (for an event that should recur every day). If no
days are selected, the event will not occur at all.
•
Action - event control actions may include Preset (default), Off, Start Sequence, or Stop
Sequence.
•
Item - defines the preset or sequence the event will activate.
•
Time - sets the time the selected action will take. Default respects programmed preset
times. Manual timing options are also available.
Auto Timed Hold
All scheduled events support a configurable Auto Timed Hold property with options of No
(default), Yes, and While Closed.
When manual control is taken during an event and Auto Timed Hold is set to Yes, that active
event is placed on hold until the interrupting action has completed and the hold timer lapses.
When the hold timer expires, the currently scheduled event executes.
If While Closed is selected, manual activity will only start an Auto Timed Hold if the system is in
a closed state.
If No is selected, the events schedule is not placed on hold after manual activity, and the next
scheduled event will override the manual control at the pre-configured event time.
Open Hours
Open Hours allow you to configure specific opening and closing times for your system. Multiple
sets of Open or Close hours can be assigned to recur on specific days.
Select Add Open/Close to create new opening or closing hours that can be used as triggers for
timed events.
