Controlling Parameters
22
3.
Press the Record Palette button.
4.
Press Include Options to choose to record for all channels, or only the ones currently
selected.
5.
Pick a palette chip to record, or press Cancel to exit without saving. Light gray chips
contain palette information; those in dark gray are blank.
6.
Press and hold on the palette chip to add a label in addition to the palette number.
Using Beam Palettes
In order to use a recorded beam palette, select the channel(s) you wish to apply the palette to,
navigate to the beam palette page, and tap the palette you wish to apply. To revert to defaults,
home the channel(s).
Parameter, Lamp Commands
Lamp commands allow you to execute control functions for a selected fixture such as calibrate,
douse lamp, strike lamp, and reset. Each fixture type has its own set of lamp commands.
Parameter, Home
When Home is pressed, the following options will be available:
•
•
•
•
Home All
Sends all or just the selected
of the selected fixtures to their home positions. The
home positions are pre-recorded in the patching personality files, and may not be changed by
the user.
Generally, parameters home to useful settings. For instance, pan and tilt will be set to mid-way
values. Gobos and beam control will be set so that the beam is unobstructed and visible.
