2 of 8
S p e C i f i C a t i o n S
GEnErAL
•
40 leD color mixing wash fixture
•
etl listed to Ul1573 – the standard for stage and studio
lighting units
•
ip20-rated for indoor use
•
power and DmX in/thru connections for easy setup
•
User-friendly control interface with multiple modes and
fixture settings
physicAL
•
rugged die-cast all-metal housing
•
easy access slots for secondary lenses and standard 7.5”
par accessories
•
available in black (standard), white or silver (optional) or
custom colors (contact factory)
•
Hanging yoke standard. optional yoke/floor stand available
ELEctricAL
•
100VaC to 240VaC 50/60 Hz universal power input
•
neutrik power in and thru connections
•
Up to 10 fixtures (15a max) may be linked via power thru
connector
•
requires power from a non-dim source
LED*
•
50,000 hour leD life (50,000 hours to 70% intensity)
•
40 luxeon
®
rebel leD emitters
*See additional leD notes on page three
cOLOr
•
exclusive
x7 Color System
™
seven-color leD array
•
Beautifully illuminates skin tones and other objects for
natural appearance and high color rendering
•
Broad-spectrum color interacts seamlessly with
conventional sources
•
exclusive optional red-shift option emulates tungsten
dimming performance
OpticAL
•
primary field angle of 17° and beam angle of 8°
•
Secondary lenses available for multiple beam spread options
•
each fixture ships with a 25° lens; additional lenses must
be ordered separately
•
refer to accessories charts for lenses available
cOntrOL
•
DmX512 in and thru via five-pin Xlr connectors
•
multiple control options including rGB, strobe, and console-
free master/Slave mode
•
See DmX Control table for additional information
•
15-bit virtual dimming engine provides smooth, high quality
theatrical fades and minimizes color shift during dimming
•
rDm functionality for address and setting changes
thErMAL
•
ambient operating temperature of -4° to 104°f (-20° to 40°C)
•
active electronic thermal management for
droop-free operation
•
noiseless, fan-free convection cooling for acoustically
sensitive installations
•
fixture is designed for continuous operation up to 104°f
(40°C) ambient temperature and requires free flow of air
around fixture housing
ETC
®
Desire
™
Series
D40
™
a D D i t i o n a l o r D e r i n G i n f o r m a t i o n
power input cables
Use information below to order 5’ power input leads with factory fitted connectors
MODEL
DEscriptiOn
Dpa-a
5’ powerCon
™
to parallel blade U-ground
(edison) connector
Dpa-B
5’ powerCon to 20a two pin and ground (stage pin)
connector
Dpa-C
5’ powerCon to grounded 20a twistlock connector
Dpa-X
5’ powerCon to bare-end power input lead
power thru Jumpers
note: power thru jumpers connect to fixture’s output (thru) connector to provide link
to successive fixtures
MODEL
DEscriptiOn
DpJ-5
5’ powerCon to powerCon
™
fixture to
fixture jumper
DpJ-10
10’ powerCon to powerCon
fixture to
fixture jumper
Fixtures Accessories
MODEL
DEscriptiOn
SelD40fSY
Yoke with floor stand attachment
400BD
Barn door (Use only as a flexible top hat to diminish
aperture glare. not for beam shaping)
407Cf
Color frame (use for round and oblong lenses)
400l
egg Crate louver
400ptH3
top Hat 3” tube
400ptH6
top Hat 6” tube
400pHH
Half Hat 6” tube
400CC
C-Clamp (does not ship with fixture)
400SC
Safety Cable (32”)
DpSJ-25
25’ powerCon to edison
input power cable with
inline switch
