4 of 8
ETC
®
Desire
™
Series
C o n t r o l o p t i o n S
DMX input channel profiles
DMX
profile
DMX
channels
channel
Assignments
notes
Direct
9
1 – red
2 – orange
(white if lustr+)
3 – amber
4 – Green
5 – Cyan
6 – Blue
7 – indigo
8 – intensity
9 – Strobe
Direct control of each individual
color with a separate master
intensity channel. Color
calibration of leDs is not active
in this mode. the nine-channel
profile will produce the highest
quality color cross-fades.
HSi
5
1 – Hue (coarse)
2 – Hue (fine)
3 – Saturation
4 – intensity
5 – Strobe
High resolution hue (two-
channels), saturation, and
intensity control. HSi mode will
produce arbitrary color cross-
fades around the color space.
HSiC
6
1 – Hue (coarse)
2 – Hue (fine)
3 – Saturation
4 – intensity
5 – Strobe
6 – Color point
(CCt)
High-resolution hue, saturation
and intensity control as above,
with the addition of a color
point channel to adjust the color
temperature of the fixture in both
white light and color. Color cross-
fade performance is the same
as HSi.
rGB
5
(Ch. 4
not used)
1 – red
2 – Green
3 – Blue
4 – n/a
5 - Strobe
effectively addresses all seven
colors via three channels of
control. rGB profile will produce
medium quality color cross-fades
Studio
3
1 – intensity
2 – Color point
(CCt)
3 – tint
Controls fixture as a white light
unit. if no DmX, i.e. console
input, is present, fixture can
be adjusted for these three
parameters on the U/i at the back
of the unit.
additional profile options
plus 7
Seven additional color control channels are available
in rGB, HSi, HSiC, and Studio profile settings.
for example HSi with ‘plus 7’ enabled becomes a
14-channel profile:
1 – Hue (coarse)
2 – Hue (fine)
3 – Saturation
4 – intensity
5 – Strobe
6 – n/a
7 – plus 7
Control on/off
8 – red
9 – orange
(white if lustr+)
10 – amber
11 – Green
12 – Cyan
13 – Blue
14 – indigo
the desired color and intensity
is achieved by using the HSi or
rGB channels.
placing channel seven at a value
over 51% gives the fixture a
14-channel profile.
Channels 8-14 represent the
native colors of the fixture and
allow the operator to adjust
individual color channels to fine
tune the color output.
Strobe
Variable strobe control: 0% is no strobe. the fixture
output will strobe more rapidly as the strobe channel
value approaches 100%.
D40
™
C o n t r o l o p t i o n S
User settings on D40 fixtures allow multiple operational modes and
settings for either console operation via DmX protocol or stand-alone
operation. the expanded lCD display provides easy navigation to all
possible settings and options. Some of the setting options are:
•
multiple DmX choices ranging from a simple rGB
profile – which effectively controls all seven leD colors via
three channels – to nine-channel ‘direct’ color and
intensity control
•
multiple dimming curve options
•
preset colors and sequences for stand-alone (no console
required) operation
•
White point selection – white light and color behavior based
on a specific color temperature white light, i.e. 3200K,
5600K, etc
•
loss of data behavior options – instant off, hold last look for
two minutes, etc
•
output modes – three output options that offer the user a
choice between maximum output and maximum consistency
See the user manual for a complete explanation of all of the control
settings and options for the D40.
Quick setups
to assist in managing the numerous control and fixture behavior choices, five
combinations of operational settings are available to quickly get started. these
settings are specifically created for different applications and are easily accessible at
the fixture display. each setting can then be modified as required to take advantage
of all of the possible control features.
setting
title
profile
Description
typical Features*
General
Direct
factory Default:
for general purpose
use including interior
architectural applications
• Standard dimming curve
• Regulated output for
color consistency
Stage
HSi
plus 7
enabled
theatrical lighting:
Duplicates the color and
dimming behavior of
tungsten stage lighting
fixtures.
• Incandescent dimming
curve
• Regulated output for
color consistency
• 3250K white point setting
Xt arch
HSi
exterior architectural lighting:
provides a high degree
of color consistency in
high ambient temperature
environments.
• Standard dimming curve
• Protected output
• 3200K white point setting
High
impact
rGB
event lighting:
enables quickest response,
simple rGB control and
strobe channel for maximum
effect usage
• Quick dimming curve
• Boost mode for
maximum intensity
• 5600K white point setting
Studio
Studio
Studio factory Default:
enables three parameter
control of white light
(intensity, white point, and
tint) via DmX from console
or from fixture display – no
console required
• Linear dimming curve
• Regulated output mode
for color consistency
*See user manual for complete list of features for each Quick Setup
