background image

ETC Installation Guide

ColorSource

®

 PAR Pearl v1.7

Corporate Headquarters 

 Middleton, Wisconsin, USA 

 Tel +608 831 4116 

Service (Americas) 

 

[email protected] 

London, UK 

 Tel +44 (0)20 8896 1000 

 Service: (UK)

 [email protected] 

Rome, IT 

 Tel +39 (06) 32 111 683 

 Service: (UK)

 [email protected] 

Holzkirchen, DE 

 Tel +49 (80 24) 47 00-0 

 Service: (DE)

 [email protected] 

Hong Kong 

 Tel +852 2799 1220 

 Service: (Asia)

 [email protected]

Web:

 etcconnect.com 

 © 2018 Electronic Theatre Controls, Inc. 

 Product information and 

specifications subject to change. 

 ETC intends this document to be provided in its entirety. 

 US Patents 8,384,294 . 8,403,523 . 8,593,074 . 8,633,649 . 8,723,450 . 8,878,455 . 9,041,308 

 EU Patents 2638781 . 6020110157302 

 All other patents pending.

7412M2120-1.7 

 Rev A 

 Released 2018-04 

Overview

The ColorSource PAR Pearl is an affordable LED fixture that provides a bright, 
variable white light. 

The ColorSource PAR Pearl is UL924 listed as a Directly Controlled Luminaire 
for use in emergency lighting systems when used with the ETC DMX 
Emergency Bypass Controller (DEBC). 

   

Note:

Features described in this document require the latest 

version of software. For information on updating fixture 

software, see 

Updating the fixture software

 on 

page 12

.

Summary of Contents for ColorSource PAR Pearl

















Reviews: