ETC Installation Guide
Pro One-Cell
Pro One-Cell
Page 3 of 29
ETC
D1 Series, D2 Series, and D4 Series Drivers
D1 Driver
D1 HO Driver
D2 Driver
D4 Driver
Note:
Antenna is not present on RDM models.
ArcSystem Pro One-Cell luminaires require an external driver. ArcSystem D1, D2, and D4 Series
drivers use standard RJ45 connectors for DMX control.
•
The D1 Driver provides up to 25 W to a single One-Cell or One-Cell Small luminaire.
•
The D1 HO Driver provides up to 100 W to a single One-Cell High Output luminaire.
•
The D2 Driver supports one or two One-Cell Micro luminaires and provides up to 10 W per
output.
•
The D4 Constant Current Driver with Molex connectors supports four One-Cell or One-Cell
Small luminaires.
•
The D4 Constant Current Driver with terminals provides 48 VDC and 400 mA or 600 mA per
output channel, with a maximum total output of 2.4 A or 100 W.
•
The D4 Constant Voltage Driver with terminals provides 24 VDC and up to 50 W per output
channel, with a maximum total output of 2 A or 150 W.