E T C I n s t a l l a t i o n G u i d e
Control Series
Page 7 of 8
SimpleTap Occupancy Sensor
Setting the Sensitivity
The SimpleTap Occupancy Sensor’s sensitivity to motion is adjustable
between maximum and low.
Step 1: Gently insert a small flat blade screwdriver between the Sensor cover
and mounting plate and separate the two pieces.
Step 2: Slide the sensitivity switch to the maximum or low position.
Step 3: Attach the Sensor to the mounting plate. Ensure the link button hole
aligns with the button.
Linking to a Controller
After the Sensor has been installed, it must be linked to the correct controller.
Reference the
Unison Aero 902 MHz User Programming Guide
. ETC
documentation is available for free download at
www.etcconnect.com
.
sensitivity
switch
