EN
28
in soapy water. Do not use any solvents such as
petrol, alcohol, ammonia, etc. as such substances
can damage the plastic parts.
Lubrication
The appliance does not need any extra
lubrication.
Faults
Should a fault occur, e.g. after wear of a part,
please contact your reseller. On the separately
enclosed spare parts list you can find an overview
of the parts that can be ordered.
Troubleshooting
1. Excessive sparkling
This usely indicates dirt in the motor or
•
worndown carbon brushes.
Please contact the service address on the
•
warranty card.
2. The percussion drill is overheating
• The ventilationslots are covered with dirt.
Clean them with a dry cloth.
•
• The percussion drill is overloaded.
Use the machine for work for which it is
•
ment to be.
Replace the drill for a sharp one or
•
sharpen the drill by using a benchgrinder
and a twist drill grinding attachment.
The motor is defect.
•
Please contact the service address on the
•
warranty card.
Environment
To prevent damage during transport, the
appliance is delivered in a solid packaging which
consists largely of reusable material. Therefore
please make use of options for recycling the
packaging.
Faulty and/or discarded electrical or
electronic apparatus have to be
collected at the appropriate recycling
locations.
Warranty
Warranty conditions and product liability apply
according to national legislation.