EN
26
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level
- the times when the tool is switched off or when
it is running but not actually doing the job, may
signifi cantly reduce the exposure level
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns
Features
Fig.A
1. Left/right switch
2. On/off switch with speed control
3. Switch lock
4. Side handle
5. Chuck
6. Drill dept limiter
7. Switch for normal and percussion drilling
Contents of packing
1 Impact drill
1 Depth gauge
1 Side handle
1 Instruction manual
1 Safety instructions
Check the machine, loose parts and accessories
for transport damage.
2. SAFETy INSTRUCTIONS
Explanation of symbols
In accordance with essential applicable
safety standards of European directives
Denotes risk of personal injury, loss of
life or damage to the tool in case of non-
observance of the instructions in this
manual.
Indicates electrical shock hazard.
Faulty and/or discarded electrical or
electronic apparatus have to be collected
at the appropriate recycling locations.
Wear ear and eye protection
Variable speed control
Before operating the machine
Check the following:
•
Do the voltage of the machine correspond
•
with the mains voltage
Are the mains lead and the mains plug in
•
a good condition.
Do not use extension cables which are too
•
long. Use extension cables with a core
diameter of 1.5 mm
2
minimal and only when
the cable is rolled out completely.
In case of a blockage, switch of the machine
•
immediately.
Always compare the maximum rotation speed
•
of accesoires with the maximum speed of the
p ercussion drill.
Pull the mainsplug from the socket before you
•
change a drill or accessory.
Use auxiliary handles supplied with the tool.
•
Loss of control can cause personal injury.
When operating the machine
Check if the switch is placed in the ‘OFF’-
•
position before you connect the machine to
mains.
Keep the mains cable away from moving parts
•
of the machine.
First switch off the machine before you move
•
the machine downwards along your body.
Never cover the ventilation slots.
•
Immediately switch off the machine in case of:
Excessive sparking of the brushes and
•
verticiliosis in the collector.
Malfunction of the mainsplug, -socket or
•
damaged cables.
Broken switch.
•
Smoke or smell caused by scorched insulation.
•
Electrical safety
When using electric machines always observe
the safety regulations applicable in your country to
reduce the risk of fire, electric shock and personal
injury. Read the following safety instructions and
also the enclosed safety instructions. Keep these
instructions in a safe place!
Always check that the power supply
corresponds to the voltage on the rating
plate.
