1. Assemble the Foot Pad Assembly
Put the stand’s lower bracket assembly into the
slot of the bottom body.
Tighten the four screws into the holes on the
bottom of the stand’s lower bracket assembly
with a screwdriver
2. Assemble the Front Stand
Put the front stand on the bottom of foot pad assembly
and put into the slot of the stand’s lower bracket assembly
and then tighten the four screws with a screwdriver.
Insert two fixing clips into the cable and tighten the two
screws into the front stand with a screwdriver.
Take main body and components out of the accessory box.
3. Assemble the Main Body
Put the main body on the front stand and tighten the
three screws with a screwdriver.
Connect the cable of the main body and the cable
of the front stand using the connector.
Stand Lower
Assembling Bracket
Four Screws
Bottom Body
Front Stand
Cable Fixing Clip /
Screw
Cable
Cable Fixing Clip /
Screw
Screw
Front Stand
Cable and Connector
Screw
4. Product Installation
