•
37
•
OK to confirm.
To enter in SETUP menu scroll all menus with + and - buttons
up to reach the desired menu (on display will show SETUP), press
When FULL appears on the display press OK to confirm.
After pressed OK in SELECT mode, the pump goes in password mode
Pressing OK will exclude the password, otherwise if the buttons
As default, protection password is disabled. It is possible for the user
to set a protection password of the device during the definition of Setup.
To shift from BASE to FULL modes and vice versa, press + and -
buttons.
After around 2 seconds the selection is acquired by the pump and the operator can decide whether to quit SETUP menu or
to continue for additional setting. In the view of selecting pH, Redox or Free Chlorine measuring, check next paragraph.
7.1.2 - Password
to select the type of parameter to control it is necessary to pass
in FULL menu (complete menu - expert users).
On display will appear the last setting previously selected; in case
of a new product, the pump has by default BASE (simplified menu),
(only if FULL mode is active). Display show OFF (password disabled).
This mode is a loop among pH, Redox and ppm; as default pH
will flash. Acting on + and - buttons, user can select among 3 possibili-
selected choice. The pump will enter in Password menu.
Once pressed OK the pump goes in SETUP mode. In this mode is
possible to select the type of control (measure) that it want to effect.
7.1.1 - Measure type selection
ties, (pH, RX mV, ppm Cl). Pressing the button OK is confirmed the
+ or - are pressed, password mode is enabled.
ENGLISH
ones press Right Arrow. Press OK to confirm the password.
Pressing OK button, the display will show 0000. To set a
password use + or - buttons to increase or decrease value that
composes the password. To shift from the first digit to the followings
Summary of Contents for DLX pH-RX-CL Series
