ETAS XETK-S21.0B User Manual Download Page 11 | Manualshive

Page: 11 / 68

background image

XETK-S21.0B - User’s Guide

11

ETAS

Basic Safety Notices

dangers as stated in the respective product documentation. If the product is not
used according to its intended purpose, the protection of the product may be
impaired.

Maintenance and Cleaning

The product is maintenance-free. Use a lightly moistened, soft, lint-free cloth for
cleaning the product. Ensure that no moisture can enter. Never spray cleaning
agents directly onto the product. Do not user any sprays, solvents or abrasive
cleaners which could damage the product.

Transport and Installation

Cabling

Use exclusively ETAS cables at the connections of the product! Adhere to the
maximum permissible cable lengths! Observe the assignment of the cables to the
connectors! Detailed information about cabling is located in the ETK User's
Guides.

CAUTION!

The ETK can be damaged or destroyed!



Some components of the ETK board may be damaged or destroyed
by electrostatic discharges. Please keep the ETK in its storage package
until it is installed.



The board should only be taken from its package, configured, and
installed at a work place that is protected against static discharge.

CAUTION!

During installation and removal, ECU and ETK must be in a de-eener-
gized state!

CAUTION!

Risk of short circuiting the internal signals of the ETK!



When you mount the ETK to the ECU, you must ensure that the
screws and washers used will not penetrate the ETK printed circuit
board.

CAUTION!

Differences in case ground potentials can cause high currents
to flow through the shields of the cables that connect various
system modules.



Ensure that the module mounting surfaces are at the same electrical
potential or insulate the modules from their mounting surfaces.

«
...
9
10
11
12
13
...
»

Summary of Contents for XETK-S21.0B





































































Reviews:

No comments

Related manuals for XETK-S21.0B

Brand: Paradyne Pages: 12

Brand: QSC Pages: 28

Brand: Quantum Pages: 20

CLICK PLUS C2-02CPU

Brand: Automationdirect.com Pages: 10

Brand: Alacritech Pages: 20

Brand: EVS Pages: 30

Brand: SIIG Pages: 6

Brand: Baicells Pages: 10

Brand: Kontron Pages: 62

LL140 RGB Series

Brand: Corsair Pages: 30

Airborne M2M ABDN-er-DP55 Series

Brand: B+B SmartWorx Pages: 120

Brand: DigiTech Pages: 28

Brand: Ebyte Pages: 23

Soundweb 9088ii DSP System

Brand: BSS Audio Pages: 2

Brand: ADLINK Technology Pages: 108

Brand: HYCON Pages: 13

DP1.2-Vision-IP-Fiber

Brand: G&D Pages: 240

Brand: Hama Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands