ES5338.1 Carrier Board for Wheel Speed Sensor Simulation - User’s Guide
38
Technical Data and Standards
ETAS
Physical Dimensions of ES5338.1 Carrier Board
Physical dimensions of PB5338CURR.1-A Piggyback
5.2
Standards met
The ES5338.1 Carrier Board meets the following standards:
The board is only intended for use in industrial settings in accordance with EN
61326-1. Avoid potential radio interference when using the module outside of
the industrial settings with additional shielding measures!
Height
4 U
Width
5 HP
Weight
0,5 kg
Length
95 mm
Width
51 mm
Depth
17 mm
Standard
Test
IEC 61326-1
Electrical equipment for measurement, control and laboratory
use –
EMC requirements (industrial setting)
IEC 61010-1
Safety requirements for electrical equipment for measurement,
control and laboratory use - Part 1: General requirements
WARNING!
This is class A equipment. This equipment can cause radio interfer-
ence in residential areas. Should that be the case, the operator may
be requested to institute reasonable measures.
Note
The signal lines may not exceed a maximum length of 3 m!
