ETAS ES523.1, User Manual, Page: 45 / 67

ETAS Technical Data
ES523.1 - User Guide 45
To deactivate the power saving mode
Choose in System Control Center / Device Manager / Network Adapter the
used network adapter by double-click. Deactivate the "Allow the computer to
turn off this device to save power" option in the "Power Management" register.
Confirm your configuration.
The manufacturers of network adapter have different names for this function.
Example:
• “Link down Power saving”
• "Allow the computer to turn off this device to save power".
8.9.2 Supported Applications and Software Requirements
To configure the ES523.1 and for control and data acquisition, you need soft -
ware in the following versions:
Support in
Application Software
Inter -
face
Application Classifi -
cation
1)
HSP INCA
ETH XCP on Ethernet MC V10.7.0 V7.1.7
CAN/
CAN-FD
CAN Monitoring MC V10.7.0 V7.1.7
CAN Output MC V10.7.0 V7.1.7
CCP
2)
MC V10.7.0 V7.1.7
KWP on CAN MC V10.7.0 V7.1.7
UDS MC V10.7.0 V7.1.7
XCP on CAN MC V10.7.0 V7.1.7
Wake-Up
3)
MC V10.7.0 V7.1.7
1)
: MC: Measurement and Calibration
2)
: not supported by CAN-FD
3)
: only for interfaces CAN1 and CAN2