ETAS ES523.1, User Manual, Page: 29 / 67

ETAS Getting Started
ES523.1 - User Guide 29
6.3 Wiring
The ports of the ES523.1 may be wired in any order.
For order information on other cables which can be supplied separately, refer to
the chapter “Cable and Accessories” on page
51.
6.3.1 “HOST” Port
To connect the ES523.1 module with the PC (“HOST” port), you require the
CBE100 cable provided.
To connect the ES523.1 with the PC
1. Connect the HOST port of the ES523.1 with the PC interface
cable CBE100.
2. Connect the cable’s RJ-45 connector with the free Ethernet
interface of your PC.
6.3.2 “7-29V” Port
To connect the ES523.1 module with the power supply, you require the CBP120
cable or the CBP1205 cable provided.
To connect the ES523.1 with the power supply
1. Connect the cable CBP120 or the cable CBP1205 for the power
supply with the 7-29V port of the ES523.1.
2. Connect the supply voltage pins of the cable with the required
power supply.
Note the color coding of the connectors.
Note the current consumption of the ES523.1 and its supply
voltage range. The admissible values are listed in section
8.10.1 on
page 46.
NOTE
Be sure to check that the ports carry no voltage, before starting the cabling.
NOTE
Make sure you carefully check the names of the cables used. Using the wrong
cables can keep your ES523.1 from functioning properly or damage
theES523.1 and any devices connected to it.
DANGER
Dangerous electrical voltage!
Connect the power cable only with a suitable vehicle battery or with a suitable
lab power supply! The connection to power outlets is not allowed!
To prevent an inadvertent insertion in power outlets, ETAS recommends to
equip the power cables with safety banana plugs CBP1205 in areas with
power outlets.