ES5095.1 Break-Out-Panel (80-CH) - User’s Guide
9
ETAS
Introduction
Grounding / Protective Contact
To avoid danger due to insufficient grounding, please observe the following
safety measure:
De-energizing the module
The module does not have a supply voltage switch. It can be de-energized by
disconnecting the cables from all signal inputs.
Approved cables
• Adhere to the maximum permissible cable lengths.
• Do not use any damaged cables.
• Never apply force to insert a plug into a socket.
• Ensure that there is no contamination in and on the socket, that the plug
fits the socket, and that you correctly aligned the plugs with the socket.
Requirements for the installation location
Observe "Ambient Conditions" on page 22.
Requirements for the ventilation
There are no special requirements for the ventilation of the product.
Transport
To avoid damages to the hardware from electrostatic discharge, please observe
the following precautionary measures:
Maintenance
There is no need for the maintenance of the product.
Repair
If an ETAS hardware product needs to be repaired, return the product to ETAS.
Cleaning the module
• Use a dry, soft, lint-free cloth to clean the module front panel.
DANGER!
If there is no appropriate and correct grounding, exposed parts of the
module can be current-carrying. This can lead to serious injury or
even death! Be sure to verify that the module is correctly grounded,
according to IEC 61010-1!
CAUTION!
Some components of the ES5095.1 may be damaged or destroyed by
electrostatic discharges. Leave the ES5095.1 in its transport packag-
ing until installation. The ES5095.1 must only be removed from the
transport packaging, configured and installed at a workplace that is
secured against electrostatic discharges. Avoid any contact with the
connections of the ES5095.1 or with conductor paths on the card.
