ETAS ES4602, User Manual

Page: 10 / 38

Technical Description 10
3.2 Connectors CON-L (1) and CON-S (1)
ITT Cannon DLM5-260 connectors are used for signals carrying a maximum
current of 3 A. This connector type is a so-called zero-insertion force connector
with 260 pins. Plugging this connector requires no insertion force for connect-
ing the female and male contacts. A tight connection is ensured by simply
pressing the related contacts against each other. The female and male connec-
tors are locked by turning the lever on the cable plug (see Figure "Fixing the
DLM5-260 Connector (Example)" on page 10).
Fig. 3-2 Fixing the DLM5-260 Connector (Example)
note
The connectors CON-L (load/signal box side connectors) and CON-S (ECU side
connectors) are not protected against erroneous insertion (wrong side, etc.). The
user has to take care to insert the connectors on the correct sides.
DLM5-260
position "open"
DLM5-260
position "closed"