PB1650DAC1.1 D/A Piggyback (4 Channels)
21
2
PB1650DAC1.1 D/A Piggyback (4 Channels)
This section contains information about the basic features and applications of
the PB1650DAC1.1 D/A piggyback. A block diagram shows the schematic
layout of the module.
2.1
Features
The PB1650DAC1.1 piggyback is used to generate analog output signals in
VMEbus systems in conjunction with the ES1650.1 Piggyback Carrier Board.
The module has the following features:
•
digital/analog conversion with 12-bit resolution
•
four optional unipolar or bipolar output channels
•
its own control interface and ID byte
•
separately programmable reference voltage for each channel
•
analog output channels electrically isolated from the VMEbus system
2.2
Applications
The PB1650DAC1.1 is used in conjunction with the ES1650.1 Piggyback
Carrier Board in VMEbus systems to generate earth-free analog output
voltages.
note
Some components of the piggyback may be damaged or destroyed by
electrostatic discharges. Please keep the piggyback in its storage package until it
is installed.
The piggyback should only be taken from its storage package, configured and
installed at a work place that is protected against static discharge.
Summary of Contents for ES1650.1
