Hardware
13
2.2.2
Interrupt number
The solder straps P1 to P10 determine the interrupt number.
2.2.3
Boot Program Source
Use the jumper ROMSEL to select the source of the boot program for the signal
processor.
Switch
Address
Default setting
HEXHN
A23 - A20
$C
HEXLN
A19 - A18
$0
Tab. 2-1
Setting the base address
Solder strap
Interrupt number
Default setting
P1
1
open
P2
2
open
P3
3
open
P4
4
open
P5
5
open
P6
6
open
P7
7
open
P8
8
open
P9
9
open
P10
10
open
Tab. 2-2
Setting the interrupt number
note
Only one of the solder straps P1 to P10 may be closed.
note
"Boot from ROM" (pin 2 and 3 bridged) may only be set, if the ES1331.1 is
equipped with an appropriate piggyback module.
Without an appropriate piggyback module, there is no boot ROM available to the
signal processor.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
