ETAS
Technical Data
BR_XETK-S3.0
-
User Guide
43
7
Technical Data
This chapter contains information about following topics:
• System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
• Data Emulation and Measurement Memory . . . . . . . . . . . . . . . . . . . . . . 46
• Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
• Environmental Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
• Automotive Ethernet Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
• Power Supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
• Microcontroller Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
• Power-on Delay of ECU Reset. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
• DAP Timing Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
• Electrical Characteristics (ECU Interface Connector). . . . . . . . . . . . . . . 54
• Pin Assignment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
• Mechanical Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
7.1
System Requirements
7.1.1
Compatible Hardware
• CBEB100.1, CBEB105.1, ES160.1, ES162.1, and ES165.1 Automotive
Ethernet Media Converter
• ES882.1 and ES886.x ECU Interface Module
7.1.2
PC with one Ethernet Interface
A PC with one open Ethernet interface (1 Gbit/s or 100 MBit/s, full duplex) with
RJ45 connection is required. Ethernet interfaces that are implemented with an
additional network card in the PC must feature a 32-bit data bus.
Requirement to ensure successful Initialization of the Module
NOTE
Half Duplex mode and Half Duplex Ethernet interfaces are not supported.
NOTE
It is imperative you disable the function which automatically switches to
power-saving mode on your PC network adapter when there is no data traffic
on the Ethernet interface!
