Adapting
your wheelchair
User manual
Page 19 of 45
4.2.1. Length adjustment, electric footrests
1.
Loosen the setting screws (1) at
the back of the brackets for
footrest plates.
2.
Adjust to the required height.
3.
Tighten the setting screws (1).
4.
Test the footrest function once
the footrests have been adjusted
by moving them to their
outermost positions.
The illustration shows a footrest with
electric tilt and length compensation, but
this procedure is the same for all electric
footrests.
4.2.2. Length adjustment, manual footrests
1.
Remove the lock screw (1).
2.
Adjust the lower part of the foot
support (2) to the required
position.
3.
Put back the locking clip (1).
4.
Repeat the same procedure for
the other foot support.
